3 Things To Know Before Buying A Skateboard

A beginner’s choice of board will depend on where and how he intends to utilize it. Whoever wants to jump into the world of action sports straight away can get by with a pre-built, low-cost skateboard. It is preferable to pay attention to a mid-size cruiser for those who want to move through the city in a crowd or gently ride and begin their “board” sports journey.

On a long, soft longboard, it is more convenient to enjoy leisurely strolls through parks. On the “long” side, it is best to understand the fundamentals of high-speed driving. The initial board shouldn’t cost too much. There is a possibility that you won’t enjoy the sport, or that you’ll realize you bought an expensive longboard for cruising but want to get better at jumps and tricks. Due to their size, classic longboards normally cost more.

1. Weight and height

When selecting the best table, it is important to take the user’s weight, height, and foot size into consideration. A board between 7.5 and 7.8 inches should be chosen if your foot size is between 36 and 39, since anything larger or heavier may be problematic. If your size falls between 40 and 43, choose a table between 7.6 and 8.0 inches in height.

It is advised to utilize tables between 8.1 and 8.5 or even more if the purpose is for ramps if you wear shoes between 44 and 47. The size of the foot should be the main consideration when choosing a shoe size. Weight and height should also be taken into consideration, but not as much as the size of the foot. This is because one factor typically compensates for another.

2. Skateboard deck measurements?

As you are well aware, there are many different ways to use skating, including street style, freestyle, ramps, skateparks, and cruising. Weight, height, and foot size are crucial considerations when choosing your table, as we’ve already discussed, but they also have a significant impact on the type of skating you’ll be doing prior to selecting the table and the rest of the equipment.

The width of the deck, which is the factor that affects the size of the foot, is considered when calculating the dimensions of skateboard decks. Typical measurements begin at 7.5 inches (19 cm) and go up to 9 inches in width (about 23 cm). Since the smaller sizes make it simpler to perform all types of tricks or twists with the board, they are typically utilized for streetstyle (street skating) or freestyle (skate tricks). When buying a deck, the lower sizes range from 7.5 to 7.6 to 7.7 to 7.5 to 7.8 to 7.9 inches. The larger sizes (8.0-8.1-8.2-8.3-8.5-8.6-8.7-9.0) are mostly utilized for ramps (bowls/skateparks) or as a mode of transportation on the street (cruising), since they provide significantly more stability and security when picking up speed.

3. Measurements and characteristics of the axes

The majority of skateboard trucks range in size from 5.0 to 6.0 inches (127 mm and 152 mm). Similar to skateboards, the trucks must have a certain size and set of characteristics based on the use that will be made of the skate. The height is another aspect to consider when selecting the axis. There are three axes: “Low,” “Mid,” and “High.” Low trucks, also known as low profile trucks, are designed to be used with small-sized wheels for more intricate skateboarding tricks on the ground.

Mid trucks, also known as medium profile trucks, are the most popular and may be utilized for a variety of tasks, much like the more intermediate tables. These wheels typically employ a thickness of between 51mm and 55mm at most. Large cruiser-style boards and larger wheels are utilized with high trucks, also known as high profile trucks (from 56mm). It is primarily used for travelling inside the city or even for ramping.

The bolt in the middle of the axle is known as the kingpin. The rubber bands of the axle run through it, which connects the base of the axle to the hanger (upper part of the axle). It will be more stable if the kingpin is very tight since it will exert more force on the tires and cause the axle to turn less. On the other hand, if you slightly tighten it, the board will be able to turn much more easily, but it will also become more unstable.

The axle rubbers also come in a variety of forms and hardnesses. They are used together for skateboarding, one barrel-shaped and the other cone-shaped. In terms of rubber hardness, they typically range from 90A to 100A. The firmer ones (100A) are used by novice skaters seeking more stability, while the softer ones (90A) are utilized by more seasoned skaters.

What skateboard should I buy as a beginner?

The first thing we advise is that the material is always of high quality, whether it is a skate for beginners or if you are at an advanced level. Purchase well-known skate products, support the community by hosting events, and enable riders to spread the word about the culture. To perfect the materials, these brands work and conduct research. Even if you quit because it keeps you from progressing, buying a cheap, low-quality skateboard could make it tough for you to learn. The boards of the cheapest skateboards are typically of very poor quality, flex a lot, and lack a lot of usage resistance. The same thing occurs with the remaining components; because they are of poor quality, they reduce the overall usefulness of the skate for its intended use.

What should I look for in a quality skateboard?

Most beginners choose their first decks based solely on brand and pattern. You shouldn’t have chosen this while you were dealing with such a serious problem. It won’t be comfortable to ride if you get a board that isn’t a good fit for you. The quality of a board will be influenced by a number of key aspects. The length, width, and concave of the deck can also determine the quality of the skateboard. The quality of the skate can be determined by the other components (truck, wheel, bearing, etc.) also attached to the skateboard deck of your choice.

%d bloggers like this: