Learning to change your car tyres will always prove to be a useful skill because it can help you avoid tricky & emergencies when going for a long drive and you need to change your busted tyres without heading to a garage. No one wants to get stuck in the middle of nowhere and continue to wait for hours till assistance arrives. Unless you want that to happen, there’s no excuse to not learn the method of replacing your vehicle tyres.
Thus, to help you learn about the same, we have formulated this extensive guide on how you can replace your car tyres in a jiffy without having to depend on anyone to do that for you.
Technique To Follow When Replacing Your Car Tyres On The Road
Equipment that you’ll need:
- A wrench
- A jack
- A spare, working tyre
- A large mat, to kneel on it comfortably
- Find a safe spot to park your vehicle first. In case you’re on the road, ensure that you take an exit route and pull over in a safe area where there are no risks of accidents (even if your tyre is blown out). According to popular Hyundai wreckers, The surface should be flat, so that the jacking up process becomes easier for you.
- Proceed to turn on your hazard lights because safety is the first & foremost thing to worry about. Then you should get your jack, spare tyre, mat and wrench out from your vehicle. Bring all of them near to your flat tyre.
- Spread your mat across or around the flat tyre, so it becomes easier for you to either kneel or sit down.
- Proceed to use your wrench to loosen up the lug nuts of the tyre (removal of the hubcap is required to perform this). Loosen the nuts but don’t remove them right away. In case the nuts are really tight, then you can use your wrench to loosen them.
- Once you’ve loosened the lug nuts of your tyre, it’s time to use the jack to lift the vehicle off the ground. Ensure that you use the jack correctly and in case you don’t know how to do it, be sure to consult the owner’s manual. The vehicle should be raised about six inches off the floor.
- After you’ve lifted the car from the ground, it’s time to remove the lug nuts and then pull the tyre out from the vehicle. Ensure that you keep the lug nuts in a safe place so that they don’t get lost or misplaced. The tyre should be pulled in a straight line to be removed from the wheelbase.
- Now you have to place your spare car tyre into the wheelbase and then proceed to line up the lug nuts with the holes in the spare tyre. Push the spare tyre all the way, inside the wheelbase, so that it gets fitted snugly.
- Go ahead and then re-seal the lug nuts. Make sure that you don’t screw them too tightly, but the pressure should be enough to ensure that they remain in their place.
- Operate your jack so that you can bring your vehicle back to the ground level and then proceed to remove the jack.
- Lastly, it’s time to tighten up everything (including the lug nuts). Recheck all the lug nuts one by one to ensure that your tyre is ready to drive.
Signs That Might Tell You To Change Your Car Tyres Beforehand
It’s essential to know about your car tyres well if you want to avoid any roadside emergencies. That’s why we suggest inspecting your car tyres regularly for any punctures, damaged valve caps, damaged areas, uneven tread wear and the like.