Everything you need to know about Indian Boiler Regulation (IBR) Pipes

The Indian Boiler Regulation (IBR) establishes the material grades, pressure classifications, and specifications that have to be adhered to when various IBR piping and tube materials are manufactured in India. Manganese steel, carbon steel, chromium-molybdenum steel, as well as molybdenum steel are the possible metal compositions for the construction of an IBR Pipe. These pipes can be purchased in nominal pipe diameters ranging from 1/2NB all the way up to 24NB. Silicon, carbon, phosphorous, manganese, as well as sulphur, are all elements that are part of the normal chemical composition of the IBR Pipe Material. It is recommended that the carbon concentration be lower than 0.35%.

The IBR pipes and Tubes are extremely adaptable and have a high degree of structural integrity over a wide range of uses. These tubes have a remarkable capacity for withstanding tensile force. They come in sizes between 6.35mm to 254mm for the outside diameter (OD). The IBR Tube Material is developed to have a tensile strength of at least 415Mpa as well as the yield strength of at least 205Mpa. These are the minimum required values. The IBR Tubes and Pipes manufactured and supplied by an excellent IBR pipe supplier in Vadodara?have exceptional elongation properties that can reach up to 30%. We make it a priority to offer products that are of the highest possible quality at prices that are affordable.

IBR Pipe and Tube:

The manufacturing process using which the IBR Pipes are made is known to manufacture pipes that are exceptionally durable. These pipes are resistant to temperatures as high as 454 degrees Celsius and pressures as high as 2900 pounds per square inch. Applications requiring high pressure as well as those requiring low pressure make extensive use of IBR Boiler Tubes. These tubes can hold 5+ gallons of water, which is then utilised to generate steam. Low-pressure systems that have a capacity of fewer than 25 litres typically make use of tubes that are not IBR. A steam mover receives steam that has been transported from the boiler via the IBR Steam Pipe. The internal diameter of these pipes is larger than 254 millimetres, and the pressure of the steam within them can be up to 3.5 kilogrammes per square centimetre higher than the standard atmospheric pressure.

The IBR Pipe Line is utilised in a broad variety of gas pipelines, drinking water pipes, chemical systems, and other infrastructures. In the manufacturing of the IBR Pipes and tubes as well as the rest of our products, we employ the most recent technology and make use of the highest quality raw materials.

Standard schedules from 20 to 160, as well as XXS, are all available for the IBR Feed Pipe. They come in a variety of lengths, including sliced, single-random, and double-random options. The MS IBR Pipe is well-known for having high resistance properties in addition to its superior quality. These pipes are not only long-lasting, but they are also simple to clean and maintain.

Indian Boiler Regulation (IBR) 1950:

The IBR is a collection of standards that are developed to regulate the design, inspection, materials, construction, as well as testing of the boilers along with their components for compliance. These standards were developed by the Bureau of Indian Standards. These laws were produced by the Central Board for Boilers, which also routinely evaluates and updates the standard in order to ensure that it is in line with the rapidly evolving boiler technology.

Any material or boiler component or IBR pipe dealer in Vadodara, mountings, boiler pipework, valves, as well as fittings that are intended to sell their products in India are required to conform with the IBR 1950.

Because the Indian government vigorously enforces the IBR, no equipment or material can be imported to India unless it gets clearance by a certificate indicating that all import requirements are met the requirements of the IBR. This certificate is required to have an endorsement from an Inspecting Authority that has the approval of the Government of India.

IBR Services Inclusions:

  • Pipes are subjected to testing, inspection, as well as certification (Form III-A)
  • Review and authorization of the designs of the valves as well as fittings (Form III-C)
  • Materials undergoing testing, inspection, as well as certification (Form IV-A)
  • Observation of tests mandated by the IBR 1950 for particular products, solely for the purposes of the IBR
  • Supervision of fabrication, as well as quality inspections of welded joints
  • Welder certification may involve observation of test specimens? welding concerning the process.
  • Observation in the laboratory of both destructive, as well as non-destructive tests performed on welded test pieces.
  • Welders and welding methods are subjected to certification.
  • Welders who need their certifications renewed (Form XII as well as XIII)

Identification of IBR Tubes and Pipes:

All lines and condensates whose design pressure is higher than 3.5 kilogrammes per square centimetre. All lines as well as condensate with a diameter of 10 inches or more have a design pressure that is higher than 1 kg/cm2. The IBR has jurisdiction over all of the materials that are used for condensate and line connections.

IBR Tubes and Pipes Qualification Standards:

  • A pressurised container that has a capacity that is lower than 25 litres
  • With a working gauge as well as a design gauge pressure that is less than 1 kg/cm2; or
  • Involving the heating of water to a temperature lower than 100 degrees Celsius as steam

Manufacturing Processes:

  • Hot Finished Seamless (HFS)
  • Cold Drawn Seamless (CDS)
  • Electric Resistance Welding (ERW)
  • High-Frequency Induction Welding (HFIW)
  • Hot Finished Welding (HFW)
  • Butt Welded Pipes (BWP)
  • Electric Fusion Welding (EFW)
  • Submerged Arc Welding (SAW)
  • Cold Drawn Electric Resistance Welding (CEW)
  • Oxy Acetylene Welding (OAW)
  • Manual Arc Welding (MAW)

IBR v/s Non-IBR Tubes and Pipes:

The Indian Boiler Regulations apply to everything made with an IBR Pipe label. The tubes that are not covered by the Indian Boiler Regulation are referred to as NON-IBR Pipes. The manufacturer and distributor of boiler pipes as well as IBR pipe Plates in Vadodara?are required to follow the IBR rules for the installation, manufacture, design, as well as operation of their products.